Suspension Ball Joint
Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
Ball Joint Assembly | Yes |
Mount Plate Included | No |
Nuts Included | Yes |
Adjustable | No |
Material | Steel |
Castle Nut Included | No |
Height | 3.386 |
California Proposition 65 | WARNING: This product can expose you to chemicals including Ethylene Thiourea, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. |
Maximum Outside Diameter | 95.0 |
Stud Thread Length | 1.024 |
Mounting Bolt Length | 36.4 |
Maximum Outside Diameter | 3.740 |
Ball Joint Stud Type | Threaded |
Tapered Stud | Yes |
Greaseable | No |
Grease Fitting Included | No |
Stud Type | Threaded |
Mounting Bolts Included | Yes |
Cotter Pin Included | No |
Distance Between Mounting Holes | 26.90 |
Mounting Bolt Head Diameter | 19.6 |
Item Grade | Standard Replacement |
Cotter Pin Hole | No |
Bushing Quantity | 0 |
Bushings Included | No |
Mounting Bolt Length | 1.433 |
Stud Tapered End 2 Diameter | 0.709 |
Mounting Hole Quantity | 3 |
Mounting Hardware Included | Yes |
Mounting Bolt Head Diameter | 0.772 |
Meets or Exceeds Original Equipment Manufacture Specifications | Yes |
Type | Premium |
Mounting Type | Bolt-In |
Stud Thread Length | 26.0 |
Stud Thread Pitch | 1.5 |
Suspension Grade Type | Standard |
Mounting Bolt Thread Length | 30.0 |
Height | 86.0 |
Position(s) | Front Lower |
Length | 101.00 |
Housing Material | Steel |
Mounting Bolt Thread Length | 1.181 |
Stud Tapered End 1 Diameter | 24.4 |
Stud Tapered End 1 Diameter | 0.961 |
Dust Boot Included | Yes |
Dust Boot Material | Rubber |
Stud Tapered End 2 Diameter | 18.0 |
Washers Included | Yes |
Width | 95 |
Mounting Bolt Thread Pitch | 1.25 |
Weight | 0 |
Brand | Delphi |
Part Number | TC1907 |
Line Code | DFI |
UPC | 689604254509 |
Terminology | Suspension Ball Joint |
For warranty information please contact
Auto-Wares.