$38.99
Free pickup
in 2-3 days or less
We'll ship it to your local storeSuspension Ball Joint
Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
Stud Thread Length | 0.689 |
Washers Included | Yes |
Greaseable | No |
Suspension Grade Type | Standard |
Castle Nut Included | No |
Distance Between Mounting Holes | 43.90 |
Cotter Pin Included | No |
Ball Joint Assembly | Yes |
Bushings Included | No |
Nuts Included | Yes |
Grease Fitting Included | No |
Mounting Bolt Thread Length | 1.024 |
Stud Tapered End 1 Diameter | 20.2 |
Mounting Bolts Included | Yes |
Stud Tapered End 2 Diameter | 15.5 |
Mount Plate Included | No |
Height | 91.0 |
Mounting Hole Quantity | 3 |
Mounting Bolt Thread Pitch | 1.5 |
Ball Joint Stud Type | Threaded |
Mounting Bolt Length | 1.772 |
Maximum Outside Diameter | 3.622 |
Stud Tapered End 1 Diameter | 0.795 |
Mounting Bolt Thread Length | 26.0 |
Adjustable | No |
Stud Type | Threaded |
Meets or Exceeds Original Equipment Manufacture Specifications | Yes |
Maximum Outside Diameter | 92.0 |
Length | 494.0 |
Dust Boot Included | Yes |
Type | Premium |
Cotter Pin Hole | No |
Mounting Bolt Shank Diameter | 0.492 |
Width | 92 |
Mounting Bolt Shank Diameter | 12.5 |
Mounting Bolt Length | 45.0 |
Mounting Bolt Head Diameter | 17.0 |
Mounting Hardware Included | Yes |
Length | 104.00 |
Material | Steel |
Stud Tapered End 2 Diameter | 0.61 |
Height | 3.583 |
California Proposition 65 | WARNING: This product can expose you to chemicals including Ethylene Thiourea, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. |
Stud Thread Pitch | 1.5 |
Bushing Quantity | 0 |
Tapered Stud | Yes |
Dust Boot Material | Rubber |
Mounting Bolt Head Diameter | 0.669 |
Mounting Type | Bolt-In |
Housing Material | Steel |
Item Grade | Standard Replacement |
Stud Thread Length | 17.5 |
Position(s) | Front Right Lower |
Weight | 0 |
Brand | Delphi |
Part Number | TC1317 |
Line Code | DFI |
UPC | 689604251782 |
Terminology | Suspension Ball Joint |
For warranty information please contact
Auto-Wares.